**CRAFTING WITH CATS RERUN**CATMAS SPECIAL** ~ HOW WE MADE OUR FURRY OWN EPICALLY EPIC CATMAS TREE SCRATCHER WITH VELCRO CATNIP ORNAMENTS

 Supurr Festive Greetings, Pawesome Pals

Welcome to another one of our Crafting with Cats Catmas Specials.  

If mew missed any of our previous CWC posts, stop by the Crafting with Cats Page and see all our previous projects, and mew don't have to be an expert in anything to make any of them. Plus, we offer workarounds and no-sew projects for those who don't like to sew.

*    *    *

**A quick note before we begin**

All Crafting with Cats ideas and creations are of our own design, and we share them for purrsonal/home use only.

  So purrlease do not copy for commercial/resale purrposes.

Copyright ©BionicBasil®

*     *     *

In today's Crafting with Cats, we're making the only Catmas tree mew'll ever need: 

Catmas Tree Scratcher with Velcro Catnip Ornaments

What We Used:

One x Road Cone 750mm or  29.5" high

Sisal rope ~ we used 60 m x 6mm or 196ft in black

Faux fur for the bottom ~ we used dark green

Felt squares ~ we used red, white and green

Velcro tape ~ we used black

Ribbons for trim

stuffing/wadding

Optional sparkly pom poms

Catnip ~ organic homegrown extra-strong primo quality

scissors, non-toxic glue/glue gun, cotton thread, sewing machine, or needle

>^.^<

Optional Cat ~ Smooch was today's Craft Room Snoopervisor

Let's Get Started on The Tree

1. - 4. Get a road cone. We purchased ours from Amazon. We placed it on a lazy-susan turntable, which made it much easier to glue the sisal rope in place. Just glue a few centimetres/inches at a time until the entire cone is covered as above. This cone is 750 mm or 29.5" high and took approx 60 metres or 196 ft of rope. It did take a while to glue, as mew can imagine, but it looks purretty nifty when done. Leave the last couple of metres/6ft or so until mew have finished steps 5 to 11.

5. Take your faux fur and cut to size, leaving enough to finish underneath.

6. Measure the circumference at the base of the cone; ours is approx 90 cm or 35.4".

7.  Draw the same-sized circle in the middle of the faux fur.

8. Cut out the hole, and mew should have something that looks like this.

9. Check that it fits properly, tucking it under the rope.

10. We used regular non-toxic PVA glue for this stage and coated the entire base in a thick layer.

11. Place the faux fur in situ and gently press onto the glue. Leave to dry and then glue the edges to the underside to finish. Finally, glue the last part of the sisal rope to finish off. We stuck ours to the faux fur and the rope above to make sure it was secure.

12. Mew should now have a finished Catmas Tree Scratcher that looks something like this.

Let's Decorate The Tree

The Catnip Star Tree Topper

1. We created a simple 4-point design with a longer point at the bottom, so it can be stuffed into the top of the tree, but still easily pulled out.

2. Cut 2 pieces in your chosen fabric and stitch around the edge, leaving a small gap for stuffing and catnip.

3. BBHQ epically epic catnip.

4. Sew up the gap, and mew should have something that looks like this.

Pandora came to snoopervise at this point and to also do a bit of quality control! MOL

*    *    *

 The Velcro Catnip Ornaments 

1. We chose a basic square for a pressie, a shaped bauble and a bell for our catnip ornaments, but mew could make anything mew like.

2. Hot glue the soft side of the velcro to the back of each toy 

3.  Decorate with ribbon. Stitch together and follow the steps for the Catmas Star.

4. Hot glue the rough/scratchy side of the velcro to the tree, attach the toy and repeat until mew have made all your catnip decorations. 

And mew should have something that looks like this...

Isn't it epically epic?

We added a few red and green sparkly pom-poms, glued velcro on to those too and attached to the tree.

It's supurr sturdy too, so don't worry about it toppling over, as it has a nice weight to it.

So what did we think to our special Catmas Tree? 

Fudge went straight for the star, Parsley and Melvyn also really enjoyed it.

Stop by our Instagram account as we'll be posting the video's there and mew can see just how much we love our tree and what fun we're having with it.

In all honesty, this project turned out so much better than we could have ever imagined and for all those kitties being yelled at for climbing real Catmas trees, get your staff to make mew one of these, and mew can pull the ornaments off to your heart's content, climb it, scratch it, steal the star and generally be as naughty as mew like and it doesn't matter a hoot!

We think it's one of the best things we've ever made, what do mew guys think?

Health and Safety

Here at BBHQ, toys with pom poms on are only available to The B Team when the P.A. is snoopervising the play session.

Use pom pom toys under supervision only.  

Or mew can just make the Catmas Tree Scratcher without the pom poms.  If your kitty is a total heathen toy destroyer, definitely make it without the pom poms! 

Mew should regularly check shop-bought toys and discard anything that is damaged, broken, or defective.

And that furiends furry sadly brings us to the end of our second Catmas Crafting with Cats post, we do hope mew liked it, and if mew decide to make your furry own Catmas Tree Scratcher, we'd love to see, so feel free to tag us on social media @BionicBasil - Instagram & Twitter or @BionicBasilCats on TikTok.

So we'll sign off on this bright and breezy Monday and look forward to your company on Wednesday's Midweek News.

In the meantime

Keep calm and have a niptini, well, it is almost Catmas! MOL

Festive purrs

Wing Commander Basil & The B Team

Don't furget to subscribe to our blog and never miss another post. 

Disclaimer:

We at BionicBasil HQ are not responsible or liable for any injuries to person/s and/or cat/s, crafting addictions, glue on cats, paper cuts, misplaced pins and needles, cats stealing your supplies, broken scissors, cat fur stuck on your projects, or your project not turning out as planned.  By using this information, you hereby agree to indemnify and hold harmless BionicBasil and staff from and against any and all claims for personal injuries or damages of any kind arising from use of any Crafting With Cats posts we may share.

Graphics created with paid licence www.canva.com 

**SUPURR SPOOKY CRAFTING WITH CATS** **RERUN ~ PART SEVEN** How We Made The Supurr Fun Magic* Pumpkin Catnip Wand

Supurr Spooky Greetings Pawesome Pals

Thanks for joining us for a brand new Halloween Crafting with Cats post. Mew know we have so much fun making all this stuff, and we hope mew enjoy seeing it!

Previous Halloween Crafting Posts

Part One ~ Bertie the Bat, Yummy Plumpkin Tartes and the Purple Peril Kicker

Part Two ~ Spooky Haunted House + Catnip Pumpkin Toys

Part Three ~ Pumpkin Pouffe and Some Other Really Fun Pumpkin-Inspired Stuff 

Part Four ~ Gordon the Ghost Spooktacular Meowoleen Snuggle Mat

Part Five ~ The Trick or Treat Halloween Monster Truck aka MOG1

Part Six  ~ The Epic Two-in-One Cat Scratcher

*    *    *

**A quick note before we begin**

All Crafting with Cats ideas and creations are of our own design, and we share them for purrsonal/home use only.

  So purrlease do not copy for commercial/resale purrposes.

Copyright ©BionicBasil®

The Magic* Pumpkin Catnip Wand

 Isn't it epic?

*It's magic because it's got oodles of catnip inside! MOL MOL

What We Used:

Orange faux fur fabric

Non-Toxic glue + Glue gun

String

Green feathers

Tinkly bell

Wooden dowel

Catnip 

Stuffing or wadding

Needle ~ Thread ~ Scissors ~ Sticky Tape ~ Optional Sewing Machine

Today's project was made with supplies we already had in the craft room.

Let's Get Started 

1. We used some leftover fabric and other supplies in the craft room.

2.  We cut a circle for our pumpkin in the orange faux fur about 7.5" or just under 17 cm in diameter. (We used a 5L paint can to draw around!!! MOL)

3. Next, we cut three lengths of string to 48" or 108 cm.

4. Tying a knot to join them together.

5. & 6. & 7.  Taping the string to the table, we plaited the three lengths together. We only did this because the sting was very thin and wouldn't have lasted two minutes with our claws. But if mew have a thicker string or twine, then mew can skip these steps.

8.  Place the string in the centre of the faux fur on the inside.

9.  Stitch the string to the faux fur. We did this because most wand toys detach too easily, so we're trying to mitigate that.

10.  And for extra security, we added a blob of hot glue.

11.  Then, we did a simple running stitch all the way around the edge of the faux fur. Leaving the needle attached to the thread as it's needed later on. So, don't snip anything yet!

12.  Gently pull the stitches so the pumpkin shape begins to form. **Make sure the end of the thread is secure before pulling the stitches. Otherwise, mew will just pull all the thread out.

13. & 14. The fun part!!! MOL   

Add as much catnip as mew want to the pumpkin, and then use some wadding to fill the rest to the top.

15.  Pull the stitches tighter so it's almost a fully formed pumpkin. Next, take the feathers and test them in situ for the right aesthetic.

16.  And then, using more hot glue, dab a little on the bottom of each feather and stick them into the top of the pumpkin. 

17. & 18. While the feathers are drying. Take the other end of the string and, using more hot glue, begin to secure the string to the end of the wand, wrapping it tightly and glueing it down as mew go until it reaches the bottom of the wooden dowel.

19.  Back to the top of the pumpkin. Pull the thread as tight as it will go and stitch the opening closed, making sure to secure the feathers as well. Then we used a small bell from another toy that Melvyn recently destroyed in between the feathers. 

20.  Finally, using a little square of orange felt, we cut enough to make an end cap.

21. & 22. & 23.  Check that the felt is big enough to overlap the dowel and fold in half, then stitch either by hand or on a sewing machine across one end and down the side. Place a tiny blob of glue on the end of the wand, then push the wand into the end cap. 

24. And voila, mew should have a really nifty, supurr fun pumpkin wand toy.

And there mew have it, only 24 easy peasy, supurr simple steps to making your very own  Magic* Pumpkin Catnip Wand! MOL 

It took just under an hour to make, so not that long, and that's us making something that we had no clue about when we walked into the craft room and pondered over the supplies we had in stock, so it should take mew much less time.

Let's see what Melvyn and Fudge Thought.

Smooch and Parsley were snoozing while these two heathens had some fun!

Watch our video on YouTube.

Direct YouTube link

Yes, they are loving it. Smooch did appear to investigate and was horrified to learn that it had been slobbered all over and promptly harumphed and stalked off in a huff, shouting at the P.A., "Mew'd better make me one all for myself!"

And before mew say a word, we know the pumpkin is too big to flick around, but it was more of a 'chase me' toy, as the P.A. wanted something that Melvyn couldn't kill and decimate totally in under three seconds. So far, the pumpkin has survived being severely stalked, pounced on, repeatedly pursued and kicked to fluff over the last few days.

But, the good news is, mew can always make the pumpkin any size mew want; a gold ball size would be purrfect for flicking.

PURRLEASE NOTE

HEALTH AND SAFETY NOTICE

Just before we go, we must say,

 NEVER EVER EVER 

...leave your kitty unattended with: 

wand toys, teaser toys or any toys which could be a potential hazard

When we're finished playing, we always make sure any ribbons or string are wrapped around the handle before putting the toy away in the toy box until next time.

And that furiends furry sadly brings us to the end of Halloween Crafting with Cats re-run series. 

We do hope mew enjoyed it, and if mew decide to make your furry own Magic* Pumpkin Catnip Wand, tag us on social media @BionicBasil.

We do hope mew liked it, and we'll be back tomorrow with more Midweek News!

Until then....

MUWAHAHAHAHAHAHAHAAAAAAAAA

Wing Commander Basil & The B Team

Don't furget to subscribe and never miss another post!

Disclaimer:

We at BionicBasil HQ are not responsible or liable for any injuries to person/s and/or cat/s, crafting addictions, glue on cats, paper cuts, misplaced pins and needles, cats stealing your supplies, broken scissors, cat fur stuck on your projects, or your project not turning out as planned.  By using this information, you hereby agree to indemnify and hold harmless BionicBasil and staff from and against any and all claims for personal injuries or damages of any kind arising from the use of any Crafting With Cats posts we may share.

Graphics created with paid licence www.canva.com 

Music used under license from SoundStripe. Track: Jackolantern Jive   Artist: Lunareh